Jump to content

Cooling zone in a wellness facility

From RUVARO Sauna Wiki

Cooling zone in a wellness facility is an area offering ways to cool after using a sauna or another heated room. It may contain showers, seating in fresh air, a cooling terrace or cold-water facilities. It connects the hot zone with rest areas, while providing space to wash and move without obstructing hot-room entrances.

Cooling provision should offer choices. Immersion in cold water is one option, rather than a necessary stage of every sauna visit. Finnish public guidance describes fresh air or a shower during breaks.[1]

Showers and water facilities

Tiled shower wall with an overhead rain shower, a wall jet shower, a hose above a shallow basin, a small arm basin and a fold-down seat with grab rail; a person in dark swimwear rinses their legs with the hose, seen from behind.
Cooling showers and basins give different strengths of cooling, from an overhead rain shower and a jet to a hose at knee height and a small basin for the arms, with an accessible shower position with seat at the end of the row. AI-generated illustration.

Showers provide rinsing and a controllable change in water temperature. Locating them near the hot rooms and cold-water facilities supports the expected washing routine. Controls, water supply and drainage need to suit frequent barefoot use. A decorative shower effect does not replace clear operating instructions or temperature control.

A plunge pool provides immersion in a small body of cold water. Its temperature varies with the installation and operating policy; there is no single international temperature applying to all sauna plunges. Operators should identify the actual conditions and describe access, depth and any restrictions. Temperature alone does not establish safe water quality.

Recirculating pools require treatment appropriate to their design and use. A small volume can receive a high bather load, especially when groups leave a sauna together. Water clarity, circulation, cleaning and chemical control remain relevant even when water is cold. In Great Britain, HSE swimming-pool guidance provides a framework for pool safety management; the applicable technical requirements depend on the system.[2]

Cold-water risks

Sudden cold-water immersion can cause involuntary gasping, rapid breathing and cardiovascular strain. The RNLI identifies water at 15°C and below as capable of producing cold-water shock; this is a hazard warning, not a recommended plunge temperature.[3]

Small tiled cold-water basin with wide slip-resistant steps and a stainless-steel handrail; one adult in swimwear rinses under a wall shower beside the steps while another stands in clear water up to the shoulders, head above water, holding the rail.
A plunge pool in the cooling zone: a rinse shower at the entry, slip-resistant steps with a handrail for controlled entry and exit, and water clear enough to see the bottom. AI-generated illustration.

Facilities can reduce pressure to take part by offering an ordinary shower and seating as clear alternatives. Safe entry and exit, handholds, suitable steps and a way to call for assistance are important. Guests should not be encouraged to jump, hold their breath or compete over time in the water. Individual medical suitability cannot be established by a general room sign.

Natural-water access introduces conditions absent from a controlled basin: currents, depth changes, poor visibility, water quality and changing weather. A terrace beside a lake or the sea does not make that water part of a supervised pool. Any offered access needs separate assessment and accurate information about its status.

Outdoor cooling

Outdoor areas may provide sheltered seating, walking space and access to cool air. Privacy screens, lighting, handrails and surfaces need to work in the weather expected at the site. Rain, leaves, algae, snow and ice can change the suitability of a route during the day. Closure arrangements are needed when conditions exceed what the area can safely accommodate.

Floors, circulation and rest

Water from showers and departing bathers must drain without forming pools across circulation routes. Slip resistance needs to be considered under wet and contaminated conditions, with cleaning methods compatible with the finish.[4] Loose towels, footwear and furniture can also obstruct movement.

A waiting area should not block a plunge's steps or a sauna door. The transition to a relaxation area needs places for towels and robes so that water is not carried onto dry seating unnecessarily. Sound separation can preserve quiet where cooling showers and social activity are close to rest rooms.

Plan with hot rooms at the left, sauna showers outside their doors, a central hall with showers, small basins and a plunge pool with handrails and a waiting area, a door to an outdoor terrace at the top, then a foot bath, a drip zone with towel station and the rest area at the right, joined by one-way arrows.
Layout of a cooling zone: showers right outside the hot rooms, a choice of showers, basins, a plunge pool and a sheltered outdoor terrace, then a foot bath and a drip zone before the rest area. Guests move one way through the zone and loop back for the next round. Conceptual layout, not to scale.

Cleaning and inspection schedules should follow actual use. A single group session can sharply increase demand on showers, pool steps and towels. Monitoring these peaks helps operators set admission and programme limits for the whole bathing circuit.

See also

References

  1. ↑ InfoFinland. Finnish sauna, updated 11 April 2025. Finnish cultural practice and bathing advice.
  2. ↑ Health and Safety Executive. Health and safety in swimming pools, HSG179, fourth edition, 2018; reissued with amendments. Guidance for Great Britain.
  3. ↑ Royal National Lifeboat Institution. Cold water shock.
  4. ↑ Health and Safety Executive. Flooring. Guidance on floor suitability and slip prevention in Great Britain.