Jump to content

File:VTT 1992 test configuration - supply above heater and low extract - schematic.svg

From RUVARO Sauna Wiki

VTT_1992_test_configuration_-_supply_above_heater_and_low_extract_-_schematic.svg (SVG file, nominally 2,000 × 1,125 pixels, file size: 17 KB)

Summary

Two sections of the same sauna room: in A a blue supply stream sinks to the floor, in B it enters above the heater and mixes into the rising plume while air is extracted near the floor.

Panel A shows supply air entering behind the heater, outside its plume, and sinking, leaving a cooler lower zone and a warmer upper zone. Panel B shows supply air entering directly above the electric heater, being drawn into the plume and mixing, with a low extract opening; the shading is more even. Both panels are marked as one tested configuration without measured values.

Source

Made for the RUVARO Sauna Wiki (image plan G06, asset G06-A019). Planned for: Airflow in a sauna, Mechanical sauna ventilation, Sauna air inlet, Sauna air outlet, Sauna ventilation. Based on:

Production

  • Method: vector drawing written as SVG code (svg_code), not a raster image.
  • Date: 18 October 2026.
  • Status: draft. Pending review: technical review.

Licensing

© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:13, 18 October 2026Thumbnail for version as of 12:13, 18 October 20262,000 × 1,125 (17 KB)Nora van Rossum (talk | contribs)RUVARO image upload

Metadata