Jump to content

File:ThermoWood-three-stage-process-schematic.svg

From RUVARO Sauna Wiki

ThermoWood-three-stage-process-schematic.svg (SVG file, nominally 2,400 × 1,600 pixels, file size: 27 KB)

Summary

Three equal panels linked left to right: high-temperature drying, thermal modification, then cooling and conditioning, with a note on protective steam.

Heat dries the wood in the first phase; in the second the heat is held steady while the modification takes place; in the third a water spray cools the load and water and steam raise its moisture content again. The handbook states that steam protects the timber during thermal modification. Arrows show order only; panel widths and colours carry no temperature, time or moisture values.

Source

Made for the RUVARO Sauna Wiki (image plan G04, asset G04-W09). Planned for: Thermowood. Based on:

Production

  • Method: vector drawing written as SVG code (svg_code), not a raster image.
  • Date: 18 October 2026.
  • Status: draft. Pending review: technical review, visual review, publication format review.

Licensing

© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:09, 18 October 2026Thumbnail for version as of 12:09, 18 October 20262,400 × 1,600 (27 KB)Nora van Rossum (talk | contribs)RUVARO image upload

The following page uses this file:

Metadata