Jump to content

File:Influences on an air-temperature sensor in a sauna - schematic.svg

From RUVARO Sauna Wiki

Influences_on_an_air-temperature_sensor_in_a_sauna_-_schematic.svg (SVG file, nominally 1,800 × 1,350 pixels, file size: 17 KB)

Summary

Probe on a short stem between a hot stone bed and a cool glass pane, with labelled arrows for convection, radiation, conduction along the stem and droplets on the tip.

A single probe is shown with four influences: convection between the surrounding air and the sensing tip, marked as the intended coupling; radiation arriving from a hot stone bed and leaving towards a cool glass pane; conduction along the stem to the wall; and droplets on the tip that evaporate after a water application. An inset shows the tip inside an open radiation shield.

Source

Made for the RUVARO Sauna Wiki (image plan G06, asset G06-A015). Planned for: Sauna thermometer, Temperature measurement in a sauna, Heat transfer in a sauna. Based on:

Production

  • Method: vector drawing written as SVG code (svg_code), not a raster image.
  • Date: 18 October 2026.
  • Status: draft. Pending review: technical review.

Licensing

© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:13, 18 October 2026Thumbnail for version as of 12:13, 18 October 20261,800 × 1,350 (17 KB)Nora van Rossum (talk | contribs)RUVARO image upload

Metadata