File:Steady heat conduction through a layer - schematic.svg
Steady_heat_conduction_through_a_layer_-_schematic.svg (SVG file, nominally 1,800 × 1,350 pixels, file size: 4 KB)
Summary
Section of a single layer with a warm side and a cool side, a straight falling temperature line across it, an arrow of heat flow and the formula below it.
A homogeneous layer of thickness d and area A separates a warm side at temperature T1 from a cool side at T2. A straight line across the layer falls from T1 to T2. An arrow shows heat flowing from warm to cool. The relation written below it is heat flow = lambda x A x (T1 - T2) / d, where lambda is the thermal conductivity.
Source
Made for the RUVARO Sauna Wiki (image plan G06, asset G06-A044). Planned for: Thermal conduction in a sauna, Sauna insulation. Based on:
- ISO 7345:2018, Thermal performance of buildings and building components - Physical quantities and definitions — https://www.iso.org/standard/65000.html
- NIST, 'Fire Dynamics' (conduction, convection, radiation; power versus heat flux) — https://www.nist.gov/el/fire-research-division-73300/firegov-fire-service/fire-dynamics
Production
- Method: vector drawing written as SVG code (svg_code), not a raster image.
- Date: 18 October 2026.
- Status: draft. Pending review: technical review.
Licensing
© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 12:14, 18 October 2026 | 1,800 × 1,350 (4 KB) | Nora van Rossum (talk | contribs) | RUVARO image upload |
You cannot overwrite this file.
File usage
The following 2 pages use this file:
