File:Sauna temperature sensor heat exchange schematic.svg
Sauna_temperature_sensor_heat_exchange_schematic.svg (SVG file, nominally 1,800 × 1,800 pixels, file size: 14 KB)
Summary
Cross-section of a generic sensor housing on a timber wall with arrows for convection, radiation, conduction through the mount and cable, and a dashed cooler supply-air arrow.
Side section of a generic sensor housing on a sauna wall. The sensing element inside is not specified. The housing gains and loses heat by convection with moving air, by radiation with the heater side and other visible surfaces, and by conduction through its mount and cable. Cooler supply air reaching the sensor can cool it. The thermal mass of element and enclosure causes a response lag. Schematic, not to scale. Double-headed exchange arrows do not fix the net heat-flow direction, which depends on the actual temperatures. Label key: A: sensing element (type not specified). B: other visible surfaces. C: conduction through mount and leads. D: cooler supply air, if it reaches the sensor. E: thermal mass of element and enclosure: response lag. Notes: Schematic, not to scale.
Source
Made for the RUVARO Sauna Wiki (image plan G05, asset G05-D05). Planned for: Sauna temperature sensor. Based on:
- Pearce et al., Guide on Secondary Thermometry: Industrial Platinum Resistance Thermometers, BIPM CCT, 2021 — https://www.bipm.org/documents/20126/41773843/BIPM_CCT_Guide_to_IPRTs.pdf
- Harvia, “Temperature sensor installation”, updated 20 March 2026 — https://support.harvia.com/hc/en-gb/articles/22159468429212-Temperature-sensor-installation
- Sauna temperature sensor
- Pearce et al., BIPM/CCT Guide on Secondary Thermometry: Industrial Platinum Resistance Thermometers, 22 November 2021 — https://www.bipm.org/documents/20126/41773843/BIPM_CCT_Guide_to_IPRTs.pdf
- Harvia, Temperature sensor installation, updated 20 March 2026 — https://support.harvia.com/hc/en-gb/articles/22159468429212-Temperature-sensor-installation
- Unmodified G05 wiki source cache — https://ruvarowellness.com/wiki/
Production
- Method: vector drawing written as SVG code (svg_code), not a raster image.
- Date: 18 October 2026.
- Status: draft. Pending review: technical review.
Licensing
© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 12:11, 18 October 2026 | 1,800 × 1,800 (14 KB) | Nora van Rossum (talk | contribs) | RUVARO image upload |
You cannot overwrite this file.
File usage
The following page uses this file:
