Jump to content

File:Sauna heater stone bed heat and airflow schematic.svg

From RUVARO Sauna Wiki

Sauna_heater_stone_bed_heat_and_airflow_schematic.svg (SVG file, nominally 2,400 × 1,800 pixels, file size: 15 KB)

Summary

Section showing covered elements, stones supporting one another, contacts and qualitative rising-air arrows.

The drawing separates heat-transfer contacts from open voids in a bounded electric heater example. Stones support one another and the grate; incidental element contact is not the same as wedging or loading an element. Casing, inlet positions and fill height are illustrative. Arrows carry no measured rates. Other heater families require their own documented construction and loading pattern. Label key: A: Heating element (electric heater example). B: Element-to-stone contact. C: Stone-to-stone contact: conduction. D: Cooler air enters (inlet position varies by design). E: Stone surface for water (where the heater permits). Notes: Schematic, not to scale – not a loading pattern.

Source

Made for the RUVARO Sauna Wiki (image plan G05, asset G05-B01). Planned for: Sauna stones, Stacking sauna stones. Based on:

Production

  • Method: vector drawing written as SVG code (svg_code), not a raster image.
  • Date: 18 October 2026.
  • Status: draft. Pending review: technical review.

Licensing

© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:10, 18 October 2026Thumbnail for version as of 12:10, 18 October 20262,400 × 1,800 (15 KB)Nora van Rossum (talk | contribs)RUVARO image upload

The following 2 pages use this file:

Metadata