Jump to content

File:Sauna heater sizing check sequence diagram.svg

From RUVARO Sauna Wiki

Sauna_heater_sizing_check_sequence_diagram.svg (SVG file, nominally 2,400 × 1,600 pixels, file size: 10 KB)

Summary

Flowchart of five numbered boxes in two rows from measuring geometry to checking controls, supply, structure, clearances and duty, ending in a box with a document icon

Flowchart of five numbered steps: 1 measure internal geometry and relevant exposed surfaces; 2 apply only the chosen manufacturer's current adjustment method; 3 verify the model's minimum and maximum room limits; 4 establish what the stated rating means; 5 check controls, supply or flue, structure, clearances and intended duty. An end box states that the result identifies a candidate and that the current installation manual remains the controlling document. A side note warns against averaging or transferring factors between manufacturers.

Source

Made for the RUVARO Sauna Wiki (image plan G05, asset G05-C04). Planned for: Sizing a sauna heater. Based on:

Production

  • Method: vector drawing written as SVG code (svg_code), not a raster image.
  • Date: 18 October 2026.
  • Status: draft. Pending review: technical review.

Licensing

© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:11, 18 October 2026Thumbnail for version as of 12:11, 18 October 20262,400 × 1,600 (10 KB)Nora van Rossum (talk | contribs)RUVARO image upload

The following page uses this file:

Metadata