File:Sauna control integrated and distributed arrangements.svg
Sauna_control_integrated_and_distributed_arrangements.svg (SVG file, nominally 2,400 × 1,350 pixels, file size: 10 KB)
Summary
Two-panel schematic: left, a heater with built-in interface, control, switching and sensing blocks; right, a wall panel linked by a signal line to a power stage that feeds a heater, plus a wall sensor assembly with regulating and protective elements.
Two arrangements side by side. Left: interface, thermostatic control, switching and a sensing element are built into the heater. Right: a wall panel sends low-power signals to a power stage, which may be a separate unit or electronics mounted in the heater, and the power stage switches the heating load; a wall sensor assembly contains a regulating and a protective element. In both cases supply comes from the fixed installation. Terms such as control panel, control centre and power unit vary by product. Conceptual, not a wiring or installation diagram. Protective components are not detailed in the integrated-control panel; their omission does not imply absence of protection. Label key: A: Power stage (separate unit or heater-mounted electronics). B: from fixed installation. Notes: Terms such as control panel, control centre and power unit vary by product. Conceptual, not a wiring or installation diagram.
Source
Made for the RUVARO Sauna Wiki (image plan G05, asset G05-D03). Planned for: Sauna control unit. Based on:
- Sauna control unit
- Narvi Oy, Narvi Saana: Installation and Operating Instructions, version 04/2026 — https://narvi.fi/wp-content/uploads/2026/02/narvi-saana-manual-02042026.pdf
- Harvia, “Control unit Harvia C170VKK 17.0 kW white”, official product record — https://www.harvia.com/en-US/products/C170400VKK/c170vkk-170-kw-white
- Harvia, “Quick heater instructions for models with mechanical controls”, updated 25 June 2026 — https://support.harvia.com/hc/en-gb/articles/22158027335836-Quick-heater-instructions-for-models-with-mechanical-controls
- Harvia, Quick heater instructions for models with mechanical controls, updated 25 June 2026 — https://support.harvia.com/hc/en-gb/articles/22158027335836-Quick-heater-instructions-for-models-with-mechanical-controls
- Narvi Saana Installation and Instruction Manual, version 04/2026 — https://narvi.fi/wp-content/uploads/2026/02/narvi-saana-manual-02042026.pdf
- Unmodified G05 wiki source cache — https://ruvarowellness.com/wiki/
Production
- Method: vector drawing written as SVG code (svg_code), not a raster image.
- Date: 18 October 2026.
- Status: draft. Pending review: technical review.
Licensing
© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 12:11, 18 October 2026 | 2,400 × 1,350 (10 KB) | Nora van Rossum (talk | contribs) | RUVARO image upload |
You cannot overwrite this file.
File usage
The following page uses this file:
