File:Ruvaro sauna heating cycle diagram.svg
Ruvaro_sauna_heating_cycle_diagram.svg (SVG file, nominally 1,800 × 2,400 pixels, file size: 9 KB)
Summary
Six linked boxes show checking the room and ventilation, heating, checking readiness, using the sauna and drying according to the installed system instructions.
The six boxes retain the broad visit sequence. Room and exit checks precede operation. The ventilation icon intentionally shows no open or closed position. Electric and wood heaters require their own operating instructions. Readiness is checked as instructed for the installed system, without touching hot timber. Post-use drying follows the cabin and heater instructions and may involve continued heating; the diagram gives no generic off setting, fixed vent position or drying duration.
Source
Made for the RUVARO Sauna Wiki (image plan G03, asset G03-A207). Planned for: Heating a sauna. Based on:
- Harvia, Maintaining your sauna — https://support.harvia.com/hc/en-gb/articles/22158333579676-Maintaining-your-sauna
Production
- Method: vector drawing written as SVG code (svg_code), not a raster image.
- Date: 18 October 2026.
- Status: draft. Pending review: technical review, safety review.
Licensing
© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 12:05, 18 October 2026 | 1,800 × 2,400 (9 KB) | Nora van Rossum (talk | contribs) | RUVARO image upload |
You cannot overwrite this file.
File usage
The following page uses this file:
