Jump to content

File:Residual current device principle conceptual diagram.svg

From RUVARO Sauna Wiki

Residual_current_device_principle_conceptual_diagram.svg (SVG file, nominally 2,400 × 1,350 pixels, file size: 8 KB)

Summary

Three panels show balanced opposite arrows, a split return path bypassing the RCD sensing boundary and rejoining the source, and a balanced contact bridge downstream.

All arrows refer to one conceptual instant, not permanent AC direction. Outgoing current equals main-return plus alternative-return current. In the alternative-return example, the dashed path goes back to the same source outside the sensing boundary; no earthing topology is chosen. Disconnection depends on specified device operating conditions. In the contact example, with no parallel bypass path, the contact current returns through the sensing boundary and the residual sum can remain zero. This inference does not make contact safe or rule out operation of other protective functions. Label key: A: Residual current; disconnection depends on operating conditions. B: Balanced current can remain undetected. Notes: Physical route abstracted. Conceptual current accounting; no wiring.

Source

Made for the RUVARO Sauna Wiki (image plan G05, asset G05-E03). Planned for: Residual-current device for a sauna. Based on:

Production

  • Method: vector drawing written as SVG code (svg_code), not a raster image.
  • Date: 18 October 2026.
  • Status: draft. Pending review: technical review.

Licensing

© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:11, 18 October 2026Thumbnail for version as of 12:11, 18 October 20262,400 × 1,350 (8 KB)Nora van Rossum (talk | contribs)RUVARO image upload

The following page uses this file:

Metadata