File:RUVARO outdoor sauna two-sided moisture loads.svg
RUVARO_outdoor_sauna_two-sided_moisture_loads.svg (SVG file, nominally 2,000 × 1,500 pixels, file size: 8 KB)
Summary
Section through an outdoor sauna wall drawn as a single undifferentiated band, with four labelled arrows from outside for driving rain, solar heating, splash-back and ground moisture, three labelled arrows from inside for bathing and occupants, water cast on stones and cleaning water, and two broken drying arrows.
The wall is drawn as one band with no layers, no material names and no dimensions, because the article states that the appropriate air- and vapour-control strategy depends on the whole construction and climate. External loads are named at the roof edge, the upper wall, the base and the foundation; internal loads are named for bathing, water casting and cleaning. Two broken arrows record that drying occurs in both directions but is intermittent, and an annotation marks a cool concealed zone near the base that may remain damp between sessions.
Source
Made for the RUVARO Sauna Wiki (image plan G01, asset G01-A048). Planned for: Outdoor sauna, Sauna vapour barrier. Based on:
Production
- Method: vector drawing written as SVG code (svg_code), not a raster image.
- Date: 18 October 2026.
- Status: draft. Pending review: technical review.
Licensing
© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 11:58, 18 October 2026 | 2,000 × 1,500 (8 KB) | Nora van Rossum (talk | contribs) | RUVARO image upload |
You cannot overwrite this file.
File usage
The following 2 pages use this file:
