Jump to content

File:RUVARO combination sauna stone heater with infrared panels.svg

From RUVARO Sauna Wiki

RUVARO_combination_sauna_stone_heater_with_infrared_panels.svg (SVG file, nominally 1,800 × 1,800 pixels, file size: 9 KB)

Summary

Schematic elevation of the same cabin wall with a stone heater at the left and two flat infrared emitter panels at back height on the right, drawn in a different hatch, with one controller outside connected by two independently switched control lines and a single temperature sensor.

The third arrangement combines two unlike heat sources rather than a heat source and a moisture source. The two systems are drawn in different hatches and are shown on independently switched control lines. A caption inside the drawing records that permitted operating combinations are model-specific; the article states that separate control does not establish that simultaneous operation is appropriate for every installation.

Source

Made for the RUVARO Sauna Wiki (image plan G01, asset G01-A019). Planned for: Combination sauna. Based on:

Production

  • Method: vector drawing written as SVG code (svg_code), not a raster image.
  • Date: 18 October 2026.
  • Status: draft. Pending review: technical review.

Licensing

© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current11:57, 18 October 2026Thumbnail for version as of 11:57, 18 October 20261,800 × 1,800 (9 KB)Nora van Rossum (talk | contribs)RUVARO image upload

The following page uses this file:

Metadata