Jump to content

File:RUVARO Wood treatment families surface cross sections.svg

From RUVARO Sauna Wiki

RUVARO_Wood_treatment_families_surface_cross_sections.svg (SVG file, nominally 2,400 × 1,600 pixels, file size: 21 KB)

Summary

Six cross-sections of the same board surface comparing treatments; the wax panel shows colour partly inside the surface pores and partly as a thin uneven top layer, between the oil panel and the continuous coating film; every panel has a two-way moisture arrow.

The schematic compares six treatment families on the same board surface. In the wax-containing panel, colour sits partly inside the surface pores and partly as a thin, uneven layer on top, and a note says that the balance varies by product. For comparison, penetrating oil stays mainly in the pores, a film-forming coating makes one continuous surface layer, unfinished timber has no treatment, an industrial preservative forms a zone reaching inward and modified wood is altered throughout. A two-way arrow in every panel shows that moisture exchange with the air continues; a finish may slow it but does not stop it. Schematic, not to scale.

Source

Made for the RUVARO Sauna Wiki (image plan G09, asset G09-C01). Planned for: Sauna wax, Sauna wood oil, Wood treatment for saunas, Wood species for saunas. Based on:

Production

  • Method: vector drawing written as SVG code (svg_code), not a raster image.
  • Date: 18 October 2026.
  • Status: draft. Pending review: technical review.

Licensing

© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:19, 18 October 2026Thumbnail for version as of 12:19, 18 October 20262,400 × 1,600 (21 KB)Nora van Rossum (talk | contribs)RUVARO image upload

Metadata