Jump to content

File:RUVARO Wood stove clean burn vs smouldering load schematic.svg

From RUVARO Sauna Wiki

RUVARO_Wood_stove_clean_burn_vs_smouldering_load_schematic.svg (SVG file, nominally 2,000 × 1,500 pixels, file size: 13 KB)

Summary

Two identical simple stove drawings side by side: on the left tall flames with air arrows and only a faint wisp from the flue, on the right low flames with vapour rising from the logs, a thick grey plume from the flue and a dark tar lining inside the flue pipe.

The left panel shows a dry, hot fire: tall flames fill the firebox, air enters below the logs, the wood gases burn out, and only a little smoke leaves the flue. The right panel shows the same stove with a wet or air-starved load: the flames are low, vapour rises from the logs because evaporating water cools the fire, the gases cool before they can burn out, and a thick grey plume of smoke with fine particles and carbon monoxide leaves the flue, while tar deposits build up inside the flue pipe. The drawing shows no emission or moisture values.

Source

Made for the RUVARO Sauna Wiki (image plan G10, asset G10-I03). Planned for: Particulate emissions from sauna stoves, Smoke nuisance from a sauna, Wood smoke from saunas, Noise and smoke nuisance rules. Based on:

Production

  • Method: vector drawing written as SVG code (svg_code), not a raster image.
  • Date: 18 October 2026.
  • Status: draft. Pending review: technical review.

Licensing

© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current13:00, 18 October 2026Thumbnail for version as of 13:00, 18 October 20262,000 × 1,500 (13 KB)Nora van Rossum (talk | contribs)RUVARO image upload

Metadata