Jump to content

File:RUVARO Optical heart rate sensor skin interface error sources.svg

From RUVARO Sauna Wiki

RUVARO_Optical_heart_rate_sensor_skin_interface_error_sources.svg (SVG file, nominally 2,000 × 1,500 pixels, file size: 9 KB)

Summary

Cross-section of a strap-mounted sensor on skin with light paths curving through tissue past small vessels back to a detector, and four numbered warning markers along the path.

A generic sensor on a strap sits on the skin. A light source on its underside sends light into the skin and tissue; curved paths return to a photodetector. Small vessels are drawn with solid and dashed outlines to show pulsing blood volume, from which heart rate is derived. Four numbered markers show where sauna conditions add error: a sweat or water film on the skin, movement and changing contact pressure, skin pigmentation or tattoo ink possibly affecting the optical signal (evidence mixed), and a band that is too loose or too tight. A side note names the ECG chest strap as the heart-rate reference.

Source

Made for the RUVARO Sauna Wiki (image plan G07, asset G07-D03). Planned for: Wearable sensors in sauna research. Based on:

Production

  • Method: vector drawing written as SVG code (svg_code), not a raster image.
  • Date: 18 October 2026.
  • Status: draft. Pending review: medical review, methodology review.

Licensing

© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:16, 18 October 2026Thumbnail for version as of 12:16, 18 October 20262,000 × 1,500 (9 KB)Nora van Rossum (talk | contribs)RUVARO image upload

The following page uses this file:

Metadata