Jump to content

File:RUVARO Heat shield heat transfer paths schematic.svg

From RUVARO Sauna Wiki

RUVARO_Heat_shield_heat_transfer_paths_schematic.svg (SVG file, nominally 2,400 × 1,600 pixels, file size: 11 KB)

Summary

Cross-section diagram with a hot heater surface at left, a shield panel on two brackets in the middle with an open air gap behind it, and a wall at right. Arrows show radiation hitting the shield, heat leaving both shield faces, air rising through the gap, heat conducted along a bracket and one ray passing below the shield.

A vertical section through a heater, a heat shield and a wall. Radiation from the hot heater surface strikes the shield, which intercepts part of it. The shield warms and gives off heat from both its faces. Behind the shield is an air space that is open at the top and bottom, so cooler room air enters low and warmed air leaves high. A metal bracket that holds the shield conducts heat across the gap into the wall. Because the shield ends higher than the hot surface, one ray passes below its lower edge and reaches the wall directly. The wall is drawn with concealed layers that may be combustible. The drawing has no dimensions, temperatures or reduction values.

Source

Made for the RUVARO Sauna Wiki (image plan G08, asset G08-A01). Planned for: Heat shield, Sauna wall cladding. Based on:

Production

  • Method: vector drawing written as SVG code (svg_code), not a raster image.
  • Date: 18 October 2026.
  • Status: draft. Pending review: technical review.

Licensing

© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:17, 18 October 2026Thumbnail for version as of 12:17, 18 October 20262,400 × 1,600 (11 KB)Nora van Rossum (talk | contribs)RUVARO image upload

The following 2 pages use this file:

Metadata