Jump to content

File:RUVARO Changing room exit dry wet transition plan.svg

From RUVARO Sauna Wiki

RUVARO_Changing_room_exit_dry_wet_transition_plan.svg (SVG file, nominally 2,100 × 1,400 pixels, file size: 11 KB)

Summary

Plan drawing of a lobby between a grey dry side with lockers, a bench and parked shoes and a blue-green wet side with showers, with a dashed shoe line, a level threshold, a change of floor pattern, a drain channel and a small foot-rinse basin.

Plan view of the boundary between a changing room and a bathing area. On the dry side, shown in warm grey, lockers stand along the wall and a bench is placed beside the boundary; a pair of outdoor shoes is parked in front of a dashed shoe line. A short lobby with a door at each end separates the two sides. The floor runs through the lobby without a step. Where the wet side begins, the floor pattern changes, a slotted drain channel crosses the entrance with small arrows showing the floor falling towards it, and a small foot-rinse basin stands beside it. Showers line the far wall of the wet side, shown in pale blue-green. The drawing is conceptual and has no dimensions.

Source

Made for the RUVARO Sauna Wiki (image plan G10, asset G10-A03). Planned for: Guest flow in a sauna facility, Wellness facility zoning. Based on:

Production

  • Method: vector drawing written as SVG code (svg_code), not a raster image.
  • Date: 18 October 2026.
  • Status: draft. Pending review: technical review, safety review.

Licensing

© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:58, 18 October 2026Thumbnail for version as of 12:58, 18 October 20262,100 × 1,400 (11 KB)Nora van Rossum (talk | contribs)RUVARO image upload

The following 2 pages use this file:

Metadata