Jump to content

File:Heat transfer paths in a sauna room - schematic.svg

From RUVARO Sauna Wiki

Heat_transfer_paths_in_a_sauna_room_-_schematic.svg (SVG file, nominally 2,000 × 1,125 pixels, file size: 18 KB)

Summary

Section of a sauna with heater, bench and seated figure, with different arrow styles for conduction, convection, radiation, phase change and air exchange.

Conduction arrows pass through the wall layers, the bench contact and the stones. Convection arrows form a plume above the heater and link air with surfaces and skin. Two-way radiation arrows link heater, room surfaces and the figure. Dashed arrows mark evaporation at the stones and skin and condensation on a cooler surface. An arrow pair at the room boundary marks energy carried with air entering and leaving.

Source

Made for the RUVARO Sauna Wiki (image plan G06, asset G06-A005). Planned for: Heat transfer in a sauna, Sauna heater. Based on:

Production

  • Method: vector drawing written as SVG code (svg_code), not a raster image.
  • Date: 18 October 2026.
  • Status: draft. Pending review: technical review.

Licensing

© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:12, 18 October 2026Thumbnail for version as of 12:12, 18 October 20262,000 × 1,125 (18 KB)Nora van Rossum (talk | contribs)RUVARO image upload

The following 2 pages use this file:

Metadata