Jump to content

File:Heat capacity specimen to packed stone load diagram.svg

From RUVARO Sauna Wiki

Heat_capacity_specimen_to_packed_stone_load_diagram.svg (SVG file, nominally 2,400 × 1,350 pixels, file size: 13 KB)

Summary

Three parts show specific heat, mass-based capacity and the solid-volume fraction in a packed stone bed.

For a representative common material C=m c. The approximation Q≈m c ΔT requires roughly constant c, a common temperature change and no phase change. For mixed or nonuniform loads, sum or integrate local mass and temperature contributions. With a single solid density and heat capacity, Cstones=ρ c φ Vbed, where φ=Vsolid/Vbed. This omits air and heater metal and does not predict an instantaneous available energy or transfer rate. Label key: A: Specimen: c [J/(kg K)]. B: Constant c; common ΔT; no phase change. C: Packed bed: solids + voids. Notes: Nonuniform load: sum/integrate local contributions.

Source

Made for the RUVARO Sauna Wiki (image plan G05, asset G05-B11). Planned for: Heat capacity of sauna stones, Thermal mass. Based on:

  • Original symbolic derivations and dimensional checks — local: scripts/test_b_models.py

Production

  • Method: vector drawing written as SVG code (svg_code), not a raster image.
  • Date: 18 October 2026.
  • Status: draft. Pending review: technical review.

Licensing

© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:10, 18 October 2026Thumbnail for version as of 12:10, 18 October 20262,400 × 1,350 (13 KB)Nora van Rossum (talk | contribs)RUVARO image upload

The following page uses this file:

Metadata