Jump to content

File:Closed heat-storage sauna heater hatch closed schematic.svg

From RUVARO Sauna Wiki

Closed_heat-storage_sauna_heater_hatch_closed_schematic.svg (SVG file, nominally 2,400 × 1,800 pixels, file size: 11 KB)

Summary

Schematic cross-section of a stone chamber surrounded by a hatched insulation layer, with a closed insulated lid and a neutral heat-input block at the base.

The heat source is drawn neutrally because closed storage heaters exist in wood-fired and electric forms. With the lid closed only small standing losses leave the enclosure. Label key: A: Insulated lid or hatch. B: Heat input (electric elements or combustion, by design). Notes: Schematic, not to scale.

Source

Made for the RUVARO Sauna Wiki (image plan G05, asset G05-A04-D1). Planned for: Sauna heater. Based on:

Production

  • Method: vector drawing written as SVG code (svg_code), not a raster image.
  • Date: 18 October 2026.
  • Status: draft. Pending review: technical review.

Licensing

© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:09, 18 October 2026Thumbnail for version as of 12:09, 18 October 20262,400 × 1,800 (11 KB)Nora van Rossum (talk | contribs)RUVARO image upload

The following page uses this file:

Metadata