File:Chilled-mirror hygrometer principle - schematic.svg
Chilled-mirror_hygrometer_principle_-_schematic.svg (SVG file, nominally 1,800 × 1,350 pixels, file size: 9 KB)
Summary
Section of a small measuring cell with gas flowing over a mirror, a cooler beneath it, a light source and detector above it and a temperature sensor in the mirror.
Sample gas passes over a small mirror cooled by a thermoelectric element. A light beam reflects from the mirror to a detector; a dew film scatters part of the light. A control loop holds the mirror at the temperature where a thin dew layer is just stable, and a sensor embedded in the mirror reads that temperature as the dew point.
Source
Made for the RUVARO Sauna Wiki (image plan G06, asset G06-A058). Planned for: Dew point, Humidity measurement in a sauna. Based on:
- S. Bell, The Beginner's Guide to Humidity Measurement, NPL Good Practice Guide 124 (2013) — https://eprintspublications.npl.co.uk/7464/1/mgpg124.pdf
Production
- Method: vector drawing written as SVG code (svg_code), not a raster image.
- Date: 18 October 2026.
- Status: draft. Pending review: technical review.
Licensing
© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 12:15, 18 October 2026 | 1,800 × 1,350 (9 KB) | Nora van Rossum (talk | contribs) | RUVARO image upload |
You cannot overwrite this file.
File usage
The following 2 pages use this file:
