Jump to content

File:Adjusted sauna volume surface allowance method diagram.svg

From RUVARO Sauna Wiki

Adjusted_sauna_volume_surface_allowance_method_diagram.svg (SVG file, nominally 2,400 × 1,600 pixels, file size: 8 KB)

Summary

Diagram of an equation of labelled boxes for geometric volume, qualifying area and documented allowance giving an adjusted volume, above a range bar with model minimum and maximum and a box of separate checks

The symbolic relation is V_adj = V_geom + A × k. V_geom and V_adj have units m³, A has m² and k has m³/m². Only eligible surfaces and allowances specified by the chosen model are used. Whole-room multipliers and other methods are outside this illustration. Separate checks remain necessary; the figure identifies no approved appliance. Label key: A: V_geom: geometric internal volume (m³). B: A: qualifying surface area (m²). C: k: documented allowance (m³/m²). D: V_adj: adjusted selection volume (m³). Notes: Abstract interval; no selected model. Only additive methods; all other checks remain separate.

Source

Made for the RUVARO Sauna Wiki (image plan G05, asset G05-C05). Planned for: Glass and masonry correction factor, Sauna volume. Based on:

Production

  • Method: vector drawing written as SVG code (svg_code), not a raster image.
  • Date: 18 October 2026.
  • Status: draft. Pending review: technical review, data review.

Licensing

© 2026 RUVARO. All rights reserved. This image was made for the RUVARO Sauna Wiki and is the property of RUVARO. No licence is granted for use outside this wiki; reproduction, adaptation or distribution requires prior written permission from RUVARO.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:11, 18 October 2026Thumbnail for version as of 12:11, 18 October 20262,400 × 1,600 (8 KB)Nora van Rossum (talk | contribs)RUVARO image upload

The following 2 pages use this file:

Metadata